Wednesday, January 18, 2012
I tried to repond to the comment - no luck, so new post.
First image is cloth guide (seam guide), second image is blind hem foot.
In order to achieve a blind hem with the serger - the RIGHT needle (no left needle) must just penetrate the fold of the fabric less than 1/8" in from the fold. It will most likely trim away the excess of the raw edge of the flat edge of the fabric.
To do this - most people use a blind hem foot or a seam guide. For some sergers the blind hem foot requires that you lower the cutting blade. Whatever one works best for you or feels more comfortable - is the one to use.
I have been thinking alot about new serger projects and some of the accessory feet that make my serger life so much easier.
There have been inquiries about doing a blind hem on a serger. I may have addressed this before, but if you ask I will revisit.
It is done using the blind hem foot or seam guide. And you need to use either a 2 or 3 thread flatlock stitch. It does take practice - a lot of practice but once you get the hang of it - you will love the results.
Years ago before I had a 5 thread serger I used to use the above technique to hem knits all the time.
Hope this helps.